Tag Archives: printer

Home / printer
16 Posts

This usually means that either the hard disk or its control is completely dead whilst running the dell onboard diagnostics.

Steps to Repair Dell OptiPlex Error Code 4:-

Solution 1: First turn off the device and attempt to swap the hard drive with the support of another device that can use the same specification. If you see that the Windows device booting then it’s the hard drive issue and if it does not then, it’s all about the control. The next thing that users have to do is to purchase or perhaps replace it beneath specified guarantee.

Solution 2: If the first one didn’t solve the issue then try this one. Start tapping on the F12 and F10 key on repeated basis to produce a boot menu. Start tapping some of those keys in the keyboard and the CD will start the Windows install wizard. This is about second solution.

Solution 3: Go to it if all of the previous solutions didn’t work out to you. Be sure you’ve formatted the proper hard disk. Now select the “NTFS hard disk formatting” icon. This is done. Be aware that the GX270/280 is going to have a SATA drive so. There is not anything to get concerned about any additional drivers.

Telephone us in Dell Customer Care Support Amount to Receive your issues resolved

We’re available for customers 24*7 hours to assist them in resolving a broad selection of unexpected Dell issues having the most appropriate solution. Technical team is available for you 24*7 hours to deliver users all possible solutions as and if desired by them. So, telephone our expert technicians in Dell Printer support phone number +1-866-332-2152 to mend Repair Dell OptiPlex Error Code 3 and 4.

The error code is a very clear sign of issues happened with the Device Manager that is missing required to get installed for a specific hardware. Users will be displayed with the following error messages such as: The drivers for this device aren’t installed. Well, we’ve discussed solutions to mend Dell error code 28 on Dell Latitude notebook.

Steps to Repair Dell Error Code 28 on Dell Latitude Laptop: –

Solution 1: Update your drivers

  • Download the most recent driver on guide manner from a trusted website and execute the setup.exe file or connected executable file that you’ve downloaded.
  • The following thing that which users have been advised to perform is simply to run on the “Device Manager” that is a “run Command prompt” option, type on the market and then, run the command “msc”. Now, simply search for all of the necessary device which will appear in the list.
  • In the last, follow all of the wizard’s instructions to install your required drivers.

Solution 2: Locate and subsequently, install drivers with the Aid of “Device’s ID”

  • If it is the case where your device is not identified and the specific issue is not known subsequently, ID is required to attempt and search for all drivers. Follow below instructions to follow the process:
  • Navigate into the Device Manager” then search for “Unknown device” from the list provided in front of you. Right click it and then, select the “Properties” icon. From the “Properties” icon, then simply switch to “Details” tab and then to “parameter” from the field to “Hardware IDs” option. An ID may appear in front of you with all entire information of this device. Perform a comprehensive search for drivers using the ID. Click it and press the “Duplicate” button.
  • When the ID of device is located, now search for all the drivers. To do this, simply discover the ID to find the name of this device. The next issue is to get the drivers out of a real website. Just paste the copied ID of this device in the search field and press the “Search” icon. Now, download each of the drivers straight from the website with an appropriate icon.

For more such issues of Dell devices, phone us Dell Customer Support Today!

Get connected to our technicians in Dell printer Technical phone number +1-866-332-2152 where technicians are always prepared to assist its customers with most appropriate solution to their Dell device issues. We’re available 24*7 hours each day to assist customers as and if desired by them. Our team is backed with a thorough and wealthy team of professionals holding strong understanding of resolving every second to second issue.

The error usually occurs when the printer that the Low Density found. There might be various cause to happening this mistake, includes, Belt Unit, Drum Cartridge, and printer difficulty, etc.. So, if you’re experiencing exactly the same issue with your Dell printer, then you certainly do not be worried about it. As clarified by the Dell tech support team, this mistake is easily fixed. Well, here the website will direct you simple steps to Repair Dell Printer Error Code 092-670. So, follow these below steps to repair the issue immediately.

Steps to Repair Dell Printer Error Code 092-670:-

Solution 1:- Eliminating the Drum Cartridges

  • Sometimes, the mistake removes automatically once you switch off the printer for a couple of minutes. Then follow these steps to perform the task.
  • Switch the printer.
  • Learn if the issue still occurs. Then move to another step.
  • You should Attempt to reseat the Drum Cartridge from the following steps.

Solution 2:-Reseat the Drum Cartridge

You should try to reseat the Drum Cartridge by the following steps.

Step 1:- Removing the Drum Cartridges

  • Open front cover.
  • Then, rotate the lock levers of the internal cover to open it.
  • Next, grasp the handles on the drum cartridge that you would like to replace and pull the cartridge out halfway.
  • Now, grasp one side of the drum cartridge together with another hand and pull the cartridge in the printer.

Step 2:- Installing a Drum Cartridge

  • Now, slide the cartridge to the proper slot.
  • Subsequently, eliminate the orange protective covering of the installed drum and discard.
  • Close to the interior cover.
  • Then, rotate the lock levers to secure the interior cover when pressing on the cover with another hand.
  • Now, eliminate the cleaning pole in the backside of front cover.
  • Eliminate the cleaning pad by pressing on the white tabs between your thumb and index finger.
  • Then sew a brand fresh cleaning pad.
  • Now, attach the new cleaning mat into the cleaning pole.
  • Subsequently Insert the cleaning pole fully into among those four holes till it clicks to the inside of the printer as illustrated below, then yank it out.
  • Repeat Step above for another 3 holes. 1 time insertion is enough for every single hole.
  • Return the cleaning rod to its initial location and close the front cover.

Solution 3:- Reseat the Belt Unit

  • Switch the printer off.
  • Raise the latch of this right wing cover and open the cover.
  • Open front cover. Then rotate the lock levers of the internal cover to open it. Pull the belt out unit before the line onto the device becomes entirely visible. Pull the unit out to eliminate it in the printer. Then Grasp the handles along with this belt unit.
  • Twist the arrows onto the belt unit together with all the arrows on the printer.
  • Slide the device to the printer and then stop when the visible line reaches the printer. Then Push the front of the belt to reinstall it at the printer and till it stops.
  • Close to the interior cover. Then close the ideal cover.

Now, assess the error is resolved, if the error persists, then attempt to replace the Drum Cartridge.

Contact us Dell Customer Care Number For Obtaining Urgent Help:-

You should contact at Dell Printer support phone number +1-866-332-2152 to mend Dell Printer Error Code 092-670, also receive 24×7 aid to repair all technical issues associated with Dell Printer and other devices together with the team of Dell customer support professionals that are always available to resolve your Dell printer issues. During number, create instant link the gifted and skilled technicians, that will provide comprehensive guidance to resolve this mistake. Also, you may avail the finest solutions to mend different sorts of Dell Printer technical issues or mistake. Thus, contact on toll-free to get additional assistance.

 

If you’re attempting to add a printer to a Windows 7 PC from printer server and you have windows printing error code 0x000005b3 through the driver installation step. You then do not need to be concerned about it because this is a frequent mistake and encountered by lots of numbers of users in the time of installation process. Consequently, the error code 0x000005b3 may be caused by various reasons includes driver contradictory, when doesn’t have local administrator rights, Windows is not up-to-date, and if Print Spooler service is stopped, etc.. Well, here the website will steer you to Repair Dell Printer Error Code 0x000005b3. So, just follow the steps to repair the issue.

Steps to Repair Dell Printer Error Code 0x000005b3:-

Solution 1:- elimination of Existing Printers

  • You should attempt to the elimination of existing printers. Then again attempt to add a printer.

Solution 2:- Install the Driver

  • You should attempt and install the driver manually.

Solution 3:- Local Administrator Rights

  • Be sure you’ve got the complete administrator rights to adding the printer. Examine the administrator account.
  • Attempt to add a printer to the name of local administrator rights.

Solution 4:- Ensure Windows Is Up-to-Date

  • You should make an effort and confirm your Windows is current and there are not any missing drivers.

Solution 5:- Start Print Spooler Service

  • If you discovered the service is stopped, then start it.

To assess and start the service, follow these steps:

  • Press “Win” key +”R” key at precisely the same moment. Subsequently a run dialog will appear.
  • Locate “Sprint Spooler” in the Name list. Subsequently double-click it to open the “Properties” dialog box.
  • Then reboot your PC to your change to take effect.
  • This should resolve the issue.
  • In case, if the above solutions didn’t work to fix your issue, then you should take experts help to solve the issue.

Contact Dell Printer Customer Support To Get Immediate Assist:-

Telephone at Dell printer Technical phone number +1-866-332-2152 and get steps to Repair Dell Printer Error Code 0x000005b3 along with other issues. The Dell Printer Customer Support team works around the clock for your aid 24×7 days. By dialing this amount, you will easily join with our team of committed and experienced technicians, that are competent in repairing any sort of Dell printer issues. The techies will provide you the comprehensive manual to troubleshoot this Dell issue. Also, you may get instant online assistance to repair this sort of Dell printer problems. Thus, call with this toll-free amount to obtain instant, fast and hasty solutions to the Dell printer queries.

If your Dell printer is not functioning and you obtained the mistake CTD Sensor mistake or CTD Sensor Error 009-340, today you’re thinking exactly what I can do to resolve this issue. Then do not be concerned about, as we’re here for your aid. Our highly experienced and certified Dell tech support team has a complaint by several users to confront this type of CTD Sensor Error 009-340. So, the Error 009-340 means there is a fault with the sensor, or even the most probable issue is the CTD Sensor has become polluted by toner and is filthy. According to the Dell experts, the users should make an effort and clean the sensor will generally resolve this issue. Well, here the website will direct a couple of easy methods to Repair Dell CTD Sensor Error 009-340. The users as you require following the specified method to repair the issue.

Steps to Repair Dell CTD Sensor Error 009-340 in Printer:-

Method 1:- Alter the Printer OFF

First of all, its advice for users that they should make an effort and turn OFF their own Dell printer and wait for some time at least 12-14 seconds. Then turn the printer.

Learn if the issue still occurs, then proceed into another method.

You should make an effort and wash out the CTD (Cleaning the Color Toner Density) sensor located inside your own printer. Then follow these procedures to perform this task.

  • Ensure that the printer is switched off.
  • Push the back cover release handle and open the back cover.
  • Clean the CTD sensor inside the printer using a clean sterile cotton swab.
  • Close the back cover.
  • Switch ON the printer.

Fixing the sensor should resolve the mistake, so then proceed into another procedure.

  • You should do in order to verify the Toner used is a Dell Branded Toner. Make sure, its recommended that just Dell Branded Toners are used in Dell Laser Printers as Dell can’t guarantee compatibility or the printing quality of any 3rd party toners.
  • Then eliminate and re-install the toner instructions are available here.
  • Next, power the printer back ON and resolve if the error recurs.
  • If the error recurs using a functioning Toner or no Toner is available, Please contact Dell Technical Support or you could approach us to get speedily and fast solve the issue.

Get in Contact with Dell Customer Support team to Require Online Assist:-

Contact us in Dell Printer Support Phone Number to correct Dell CTD Sensor Error 009-340 and receive help to resolve Dell associated queries. You are able to acquire the best troubleshooting step to repair this mistake, and also reliable solutions, so call us today to get instant assistance & support for Dell Pinter’s mishaps.

For more information you can visit:Dell printer Technical phone number

This Windows mistake in Dell laptop describes a KMODE_EXCEPTION_NOT_HANDLED issue which users sometime might experience. The parameters that will arise within this error code entirely varies depending on the setup process of this computer. So, below are two methods to mend Windows malfunction 0x0000001E from Dell laptops.

Steps to Repair Windows mistake 0x0000001E in Dell laptops

Strategy 1: This is the most effective way which users may Attempt to resolve the issue faster

  • The very first step is to replace the driver that is identified from the code. This will be either using a known good backup in the installation media or using an upgraded version from the manufacturer.
  • Disable all your system drivers that has been identified in the STOP error messages or at any other recently installed drivers.
  • Verify all brand new hardware as well as software if they are properly installed.
  • If it is about a movie driver that was unfamiliar with the operating system afterward, attempt to switch to the standard VGA driver style.
  • Run the system diagnostics phase and also the most significantly a RAM check.
  • At last, you are required to disable most of filter drivers, namely remote management software, antivirus programs, backup programs etc..

Strategy 2: Execute the PSA/ePSA diagnostic phase if the above strategy didn’t work for you

  • The first issue is to search for all error codes to easily determine what component is causing this problem? Now, identify if the Windows Blue Screen has happened
  • Isolate your memory by simply linking a single module in precisely the same moment. Also isolate all of your hard disk by simply linking a great working hard disk into the system until the faulty component is discovered.
  • Boot to the Safe Mode and disable All Your Startup entries. Isolate a single Startup entry in precisely the same time before the cause is located.
  • Gather the minidump files by accessing to the C:\windows\minidump section after which, examine the minidump.

Telephone us Windows Support Team for instant solutions to various issues

We’re one-of-a-kind tech support providers working in Windows 10 Customer Support Amount having an ultimate goal to assist users in resolving a broad number of unfamiliar issues at their doorstep. Solutions are true to fit up the most acute issue.

For more information you can visit:Dell Printer support phone number

Dell Error Code 2000-0334 normally occurs when a misconfigured system document creates a registry mistake inside your operating system. To Repair Dell Error Code 0334, you want to first find out what is causing this error.

Mostly a wrong registry occurs because of reasons like improper installation or uninstall or malicious Malware disease such as assault of harmful adware, spyware and viruses. Thus, the Dell Error Code 0334 needs to troubleshoot in the time to save your system from additional damages.

Steps To Repair Dell Error Code 0334 or 2000-0334:

Solution 1: Automatic approach to mend Dell Error Code 2000-0334 using Reg Cure Guru.

  • Step 1: After installing the Program, click SCAN button.
  • Step 2: As the Scanning is completed, click FIX ERRORS to troubleshoot the Error.
  • If the Solution 1 does not operate in almost any case, our Dell Technical Support Services has listed yet another effective solution that will assist you resolve the Error Code 0334.

Solution Two: Run an Automatic Complete System Scan with Spy Hunter.

Spy Hunter is nowadays among the most recommended spyware removal tools available on the marketplace. It detects and deletes all kinds of Spyware, Viruses and Adware in the system while keeping it healthy.

  • Step 1: Install the program on your system and start it by clicking “Malware Scan” to make a fast scan during your PC.
  • Step 2: Following the scanning process, delete all of the threats by selecting all of the malicious files to eliminate the unauthenticated software.
    • Step 1: Visit Control Panel by clicking Start button
    • Step 2: Click Add/Remove Program App.
    • Step 3: If you’re able to identify the offending program, uninstall it by clicking Remove from the system.

If no offending programs are located, it is far better to use the previous automatic scan processes.

Contact us Dell Notebook Technical Support Amount for Instant Assistance:

If you find it difficult to process the above-mentioned steps by yourself, do not worry! Our Dell printer Technical phone number +1-866-332-2152 can Allow You to Eliminate this Dell Error Code 0334 instantly. Their sound and professional understanding on almost any technical related problems to Dell Products can supply you simple and user-friendly solution. They are available round the clock to meet all of your queries that will give you a hand in stress.

Most numbers of Dell Notebook users experiencing technical errors in accessing their Dell Inspiron Notebook. Among those errors is Error Code 2000-0511, which normally appears when attempt to flip on Dell Notebook. Well, it is fairly annoying situation because as soon as the error occurs, the computer doesn’t work good. So, if you’re currently with the same issue with your Dell Inspiron Notebook, and unable to perform any operation in your own system, and it’s not working smoothly, then you do not need to be worried about it. The most probably causes this Error Code 2000-0511 to happen because of a BIOS setting compatibility issue with the FAN setting. Therefore, here we’ve described some easy solutions to Repair Dell Error Code 2000-0511 using a detailed explanation of every step. Follow the steps to immediately solve the mistake.

Steps to Repair Dell Error Code 2000-0511:-

Solution 1:-Change Fan Setting To Repair Fan Issue

  • The Error Code 2000-0511 possible cause because of an error as enthusiast failed to respond properly. It is a recommendation for you, if you’re able to alter the fan setting, and then you can just try it.
  • The Dell enthusiast error message not just can not be disabled but usually needs to be removed in the SYSLOG from the BIOS even following the enthusiast is repaired. I’d suggest using the Dell enthusiast as your brand new cooler. Heatsinks on the VRM MOSFETs usually aid also.
  • If you’re unable to pursue the following steps to resolve an error, then it is possible to find more information about it or receive the possible resolutions for this enthusiast issue by joining our dexterous Dell Tech support Team.
  • Another reasons for happening this error message as a result of hard disk reasons.
  • You should attempt and reset the hard disk and then run the test over the hard drive again. Reseat the hard drive if you’re comfortable in doing so.

You should attempt and run diagnostics in your Dell system. Follow these steps to perform this task:-

  • Subsequently the computer begins to run the “Pre-boot System Assessment”, a series of embedded diagnostics that perform first testing on your own system board, keyboard, hard disk, and then display
  • After the”Pre-boot System Assessment completes” successfully, and then you are going to obtain the message “Booting Dell Diagnostic Utility Partition”.
  • Press any key to start the “Dell Diagnostics” in the “Diagnostics utility partition” in your hard disk
  • Following the Dell Diagnostics loads along with also the “Main Menu” screen appears.
  • Then you’ll have to hit the button for the option which you would like to run, such as Express Test, Extended Test, Custom Test, and Symptom Tree.
  • Follow the steps and finish a run test, then close the screen to go back to the “Main Menu” screen.
  • Then you should make a note of this error message, and that you may display in your Dell system, and will need to employ the troubleshooting steps for exactly the same to repair it.
  • this manner, you are able to diagnostic the test and finish the process.
  • It’s advised that you should upgrade to the latest BIOS to solve & Repair Dell Error Code 2000-0511.

Follow these steps to perform the task:-

  • Open your internet browser and browse to your Dell Support home page.
  • Hit the “Find Drivers, BIOS, along with other updates” link underneath the “Drivers & Downloads” subheading.
  • Hit the field “Service Tag or Express Service Code” then enter the appropriate code to your Inspiron personal computer.
  • Click the arrow next to “BIOS” to enlarge the section.
  • Locate the “Dell-BIOS” entrance with the latest release date and then click the “Download File” link for this entry.
  • Hit the “Download Now” button in the window which opens.
  • Simply launching the BIOS upgrade by double-clicking the setup document, then it should have a filename in the format of “I519-106.exe.” Hit “Update” from the window which opens to start the BIOS upgrade. When the upgrade has finished, you may see “Flash BIOS successfully”
  • In case, if you have some issue to follow the above steps, then you should take Dell Customer Support experts assistance to repair the issue.

Call us Anytime at Dell Customer Support For Immediate Assistance:-

We’re famous and leading Dell customer support service supplier also backed a team of well-experienced and certified professionals. We encourage users to phone at our Dell Printer support phone number +1-866-332-2152 to instantly connect with our technicians to mend Dell error code 2000-0511 and receive help & solve Dell issues together with the hasty and reliable solutions for many Dell issues. Thus, call us today to our specialized team, who is available 24*7 hours to deliver you the most appropriate solution for your Dell technical issues or errors.

To “Repair Dell Error Code 1 2”, is considered as one of the very prevalent issues, encounter by users when planning to start the task using their Dell Notebook. The subject is pretty much self-explanatory about Dell diagnostic lighting 1 2 lights up no BEEPS, means if your Dell Notebook has three light labelled “1”, “2”, “3”, on front desk, so that you system can not boot, can not actually access to BIOS, then you definitely want to diagnostic. But lots of numbers of users facing exactly the same difficulty, since they constructed a new Dell Notebook, and they noticed sometimes to happening bedeviling error codes in their Dell Notebook. Well, definitely among the most the frustrating error codes is Dell Error Code 1, 3, 2, the user will come across in a specific moment undoubtedly.

The possible cause of happening this mistake includes power supply issue the power button, Motherboard issue, hard disc battery issue, and so forth. So, if you’re facing the same issue with your Dell notebook or Dell Optiplex 320/ Dell Optiplex 740/ Dell XPS 420, then you do not need to be concerned about it. Understanding the reason for your Dell Error Code 1, 2, 3 is required for you personally, and what steps you should take to solve the mistake might have you back on the right track with your Dell Notebook is essential for you. Then here the below cite blog solutions will direct you in the appropriate way to eliminate this issue. Or you may join to Dell Customer Support Team for linking with skillful professionals to resolving this issue with easy online help.

Steps to Repair Dell Error Code 1 2 Optiplex Diagnostic Lights

Solution 1:- Assess Power Supply Button

  • You could have an issue, when the Dell Notebook is “chilly”, you’ve got the mistake, also as it “warms up”, the hardware malfunction is not present. This may be that the power supply isn’t delivering the proper voltage/wattage chilly, or it might be components. The first thing that you should try is to some power supply replacement, as it is the easiest to ascertain if it is the issue.
  • You may also unplug all devices except the mobo and GPU (if applicable), and attempt a cold boot. It might be the mobo/CPU on the pc — replacing the mobo is the most difficult thing to do, and you also may need to replace the CPU as well.

Solution 2:- Starting the Dell Diagnostics Out Of The Hard Drive

  • Whenever the DELL logo appears, press “F12” key instantly.
  • Notice: If you see a message stating that no diagnostics utility partition has been discovered, run the Dell Diagnostics from the “Drivers and Utilities” press
  • If you wait too long and the operating system logo appears, continue to wait patiently until you see that the Microsoft Windows desktop computer.
  • Once the boot device list appears, highlight “Boot to Utility Partition” then press “Enter” key.
  • As soon as the Dell Diagnostics “Main Menu” appears, select the test which you would like to run.

Solution 3:- Starting the Dell Diagnostics In the Drivers and Utilities Disc

  • Shut down and restart your pc.
  • Whenever the DELL logo appears, press “F12” immediately.
  • If you wait too long and the Windows logo appears, continue to wait patiently till you see the Windows desktop computer.
  • Notice: –The upcoming steps alter the boot sequence for a single period only. On another startup, the computer boots in line with the devices specified in the system setup program.
  • Then select “Run the 32 Bit Dell Diagnostics” in the numbered list.
  • As soon as the Dell Diagnostics “Main Menu” appears, select the test you would like to run.
  • Dell error code 123 occurs frequently because of RAM Setting. Inspect the ram slot to get a bent pin or another item obstructing the pliers. Also, be sure you own RAM is it’s compatible with your system.
  • If it’s okay then there is not any issue with your RAM.
  • You should restart your Dell Notebook, and attempt to perform the task, hopefully the error is resolved, after perfuming the solutions.
  • Still, if you’re facing the same issue, then you will need to call in our Dell technical support amount to find instant assistance.

For more information you can visit:Dell printer Technical phone number

Dell pc is most commonly used and world’s best fabrication firm supplying extensive features on the computers. But sometimes, users across some the specialized errors or issues in using the Dell computer. Error code 0141 is just one the mistake which confronted by lots of numbers of users when using the Dell computers. Typically, this error appears when the users start their own Dell computer. The mistake normally arises will possess the error code “2000-0141” and will associate into the hard disk components of the PC. The primary caused to the incidence of this error code 0141, includes, Corrupt or damaged Windows processes, damaged registry settings onto your system, a computer infected with viruses or malware or mismatch between the hard disk along with your operating system of your computer, and so forth. So, if you’re facing the same issue, then do not be concerned about it. Well, here the website will clarify the simple solutions to Repair Dell Error Code 2000-0141. Then you’ve just must follow the steps, that can be given below.

Steps to Repair Dell Error Code 2000-0141: –

Solution 1:- Restart Your Computer

First you should make an effort and restart your computer by simply eliminating everything in the back of the pc, except the power cable. Then turn on the pc and see if it beeps normally. If the computer has not beeped, maintain the track or display associated to see if any change occurs. If not, then you should attempt and scan your computer to solve problems.

Solution 2:- Scan Your Dell Computers for Viruses

You have to scan your Dell Computers for Viruses in sequence for fixing your virus-related mistake. Viruses might be a significant reason behind happening this Dell mistake code 0141 that you’re becoming. Basically, Viruses are small software programs that manage on your PC and corrupted a lot of the programs and files that Windows wants to run. After that to solve the problems, and economically run your Dell computers smoothly, you’ll have to run an antivirus program. After this can help to eliminate any of the possible infections on your PC.

Solution 3:- Clean Out the Registry

Sometimes, the malfunction can cause on several Dell systems because of registry problems. The registry is portion of your personal computer that stores settings and information, permitting your PC to “remember” lots of different files and settings to your system. Its suggestion for one to use a “registry cleaner” to resolve this issue.

Solution 4:- Perform “Dell Hard Drive Self-Test”

Dell computers using a fantastic feature of “Self-Drive Test” which permits you to test the integrity and reliability of your hard disk drive(s) on the system. This type of tool that used to aid you device just how nicely your hard disk is running. And, it is going to permit you to find the specific cause of this 0141 mistake in your Dell PC.

Follow the steps to perform the Self-Test Utility in the Dell Resource CD:-

  • If you do not possess the Dell resource CD installed on your computer, then you may use the below steps to this approach to install it.
  • Subsequently the first install, the Resource CD auto-runs once inserted.
  • You may see the “Welcome Dell System Owner” window and then hit “Next” button to be able to display the Criteria page.
  • Underneath, the “System Criteria” column, then select “ALL” options for your system model, “ALL” for your operating system, and “ALL” for your device type.

I hope your issue is repaired.

In case, you’re still facing the same mistake, then you must contact with our Dell Customer Service team to acquire quick assistance.

Contact Dell Customer Care Support Service to Find Instant Assist: –

Simply dial at Dell Printer support phone number +1-866-332-2152 and get solution to Repair Dell Error Code 2000-0141 along with other specialized quires. You will easily join with all the team of experienced and certified technicians to be able to troubleshoot this Dell issue. The highly skilled and certified will provide you comprehensive guidance to repair your issue. Also, they’ll allow you to mend different kinds of Dell technical errors or issues in a less period of time, together with all the optimized solutions. Thus, get in contact with the skilled experts today, and receive instant help for Dell mishaps.